Barton Marine
80 Cable St
Wellington
New Zealand
0064 4 3851490
GST No. 128-220-798

Manufacturers

Altex Regatta Gloss Enamel Group 3 Colours

  • Shipping Weight: 5lbs
  • Manufactured by: Altex

Starting at: $35.50NZD

Please Choose:





Add to Cart:

Marine Gloss Enamel

Features:

Marine Gloss Enamel is designed for use as the finishing coating for the Single Component Marine topsides system.

Marine Gloss Enamel can also be used :

  • For signwriting and boot stripes
  • For up-grading existing enamel systems, subject to correct preparation and undercoating
  • On canoes, tenders, dinghies, trailer yachts and power boats

    Advantages:

  • High gloss enamel finish
  • Marine quality
  • Good weathering properties
  • Good gloss retention
  • Good application characteristics

    Specific Data:

  • Generic Type: Polyurethane Modified Gloss Finish
  • Colour: refer Altex Yacht & Boat Colour Chart
  • Packaging: 500ml (NZ Only), 1 and 4 litre, Single component
  • Gloss: High Gloss
  • Flash Point: 35oC
  • Thinner: Altex Thinner #53 or #45
  • Storage: Store under cool, dry conditions
  • Density: 1.21 kg per litre
  • Volume Solids: 50%
  • Theoretical Coverage Rate: 10 sq metres per litre at 50 microns dry
  • Recommended Film Thickness Per Coat: 80-100 microns wet to obtain 40-50 microns dry
  • Application: Spray, brush or roller
  • Dry Times (50 µm DFT / 25oC / 50% RH):
      Touch Dry : 1½ Hr
      Hard Dry : Overnight
  • Recoat Time (50 µm DFT / 25oC / 50% RH): Recommended : Overnight (max 5 days without sanding)

    Please select colour from the dropdown list below


  • This product was added to our catalog on Friday 16 May, 2014.

    Opening Hours

    Mon-Fri: 9:00am-5:30pm
    Sat: 9am-4pm
    Sun: Closed

    We accept credit cards

    mastercard and visa

    All transactions are processed in NZD and other currencies are indicative only
    Copyright © 2019 Discount Marine. Powered by Zen Cart