Gobius 4 is suitable for all Waste Holdings Tanks
and for all tank materials
Supplied with 3 sensors and display
Gobius is suitable for all Water And Fuel Tanks
Gobius is Easy to Install: There are strips of tape on the sensors that are provided to attach the sensors directly onto the outside surface of your tank. The panel may, for example, be placed in the washroom. The control unit is connected to the boat battery. All necessary cables and plugs needed to connect the sensors and panel with the control unit are included.
The Gobius technology is patented: The sensors that are placed onto the exterior tank wall consist of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit. The control unit then starts to calculate in order to give an exact estimate of whether the fluid level has passed the sensor or not.
Doing its measuring from the outside of the tanks, Gobius is extremely easy to install. It takes no more than 30 minutes and you avoid the need to take the tank apart and drill un necessary holes.
30 minutes to install – including calibration Installing Gobius to your tank is easy – it does not take more than 30 minutes. Instead of the traditional way of installing a level indicator, i.e. taking the tank apart and drilling holes, all you have to do is attach the sensors to the tank, connect the supplied wires and then calibrate the tank by pressing a button for a few seconds.
For All brands of Tanks and Displays: The Gobius product range consists of level indicators for fuel, water and holding tanks and can be connected to displays from WEMA-, VDO and Faria. Gobius also supports NMEA 2000.
This product was added to our catalog on Thursday 08 September, 2011.
Mon-Fri: 9:00am-5:30pmSat: 9am-4pmSun: Closed