.

Manufacturers

Maxwell HRCFF8

  • Shipping Weight: 5lbs
  • Manufactured by: Maxwell

$2,259.00NZD

Add to Cart:

HRC ROPE/CHAIN SERIES

Supplied with reversing solenoid

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of their latest innovative vertical RC6 and RC8 automatic rope/chain windlasses. Packed with new and proven features, including the patented rode management technology developed by Maxwell, the new HRC6 and HRC8 are destined to become industry icons.

Supplied with dual direction solenoid pack, up/down remote panel and circuit breaker/isolator panel.

All HRC Series Windlasses Are Fitted With Maxwell’s Unique Wave Design™ Chainwheel.

This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.

As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Wave Design™ Chainwheel

Is fitted to all HRC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric.

Chainwheel’s unique Wave Design™ action




FEATURES

  • Simple ‘bolt down’™ installation ensures effortless and rapid on-deck installation and set up.
  • Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design.
  • Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation.
  • Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor.
  • Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance.
  • Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection.
  • High efficiency spur gearbox incorporating a robust non-backwind mechanism.
  • High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch.
  • Emergency 'free fall' function in the event of onboard power failure.
  • Revolutionary new chainwheel.
  • Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance.


    SPECIFICATIONS

  • Model - HRC-8
  • Maximum Pull - 405kg 900lbs
  • Chain Short Link - 8mm 5/16"
  • Rope Size (Nylon)* (3 strand or 8 plait)** - 12mm/14mm 1/2" - 9/16"
  • Line Speed (Anchor retrieval nominal 30kg) - 33m/min 108ft/min
  • Power Supply (DC) - 12V or 24V
  • Motor Power - 600W
  • Circuit Breaker - 70Amp
  • Net Weight (Electric) - 11.5kg 25lbs
    * refer to owners manual for rope size variations
    ** 8 plait recommended

    DIMENSIONS

  • Model BOTH MODELS
  • A - 260mm 10 1/4"
  • B - 150mm 5 29/32"
  • C - 197mm 7 3/4"
  • D - 120mm 4 23/32"
  • E - 250mm 9 7/8"
  • F - 77mm 3 1/16"

  • This product was added to our catalog on Saturday 15 October, 2005.

    Opening Hours

    Mon-Fri: 9:00am-5:30pm
    Sat: 9am-4pm
    Sun: Closed

    We accept credit cards

    mastercard and visa
    All transactions are processed in NZD and other currencies are indicative only
    Copyright © 2020 Discount Marine. Powered by Zen Cart