Barton Marine
80 Cable St
New Zealand
0064 4 3851490
GST No. 128-220-798


Cruzpro F60 Low Cost Fuel Guage

  • Shipping Weight: 1lbs
  • Manufactured by: Cruzpro


Add to Cart:

The F60 Digital Fuel Gauge provides a digital display for fuel level. Level can be displayed in liters/gallons or percent (0-100%) up to 999 gallon/liters or as a percentage (0-100%) up to 6500 liters/gallons.

The F60 has been pre-programmed to work with all known resistive type level senders with 0-30, 0-70, 0-90, 10-73, 10-180, 33-240, 40-250 ohm (and their revere) outputs made by VDO, Teleflex, Mercury, GM, Stewart-Warner, Centroid, Aero-Tec and others and works with both American and European style senders (senders available seperately).

Low and High Level alarms can be easily set by the user. When activated, the built-in 85 dB alarm will sound and the display will flash.

Five levels of backlighting can be selected and all set-up, calibration constants, alarm values and sender characteristics are saved in a non-volatile memory.

An external alarm output or NMEA 0183 digital serial data output can be programmed.

All constants and sender characteristics are pre-set during manufacture but you may alter these settings to suit your particular needs. Sender selection can be altered over a wide range using the front-panel switches. All information is automatically saved to non-volatile memory.

With a press of the button you can display liquid levels in Gallons or Litres or as a percentage (0-100%).

The F60 draws only 0.017 amps and 5 levels of backlight (including OFF) can be selected from the front panel.

The F60 outputs a regulated 5VDC to the sender so the reading is stable and does not change with raw battery voltage (as standard analog gauges do).

The F60 outputs fuel level on the standard NMEA 0183 serial data line at 4800 BAUD. This ASCII information can be used to log performance, repeat the display information at a remote location (see ) or for use with the CruzPro SEAviz virtual instrumentation software running under Windows on your computer (see If NMEA 0183 serial data is not required, then the output terminal can be programmed as an external alarm output pin.

Using the F60 with capacitive senders such as the Centroid 3-wire 10-180 ohm or 33-240 ohm senders. Detailed instructions on setting up the Centroid capacitive senders to work with electronic tank level gauges such as the CruzPro FU30, TL25, TL30 and F30


Operating Voltage:
  • 9.5 - 33.0 VDC

    Current Drain:
  • 0.018 amps nominal

  • 4 digit LCD, 5 levels of backlighting

  • Fuellevel display in Liters or Gallons or as a percentage (0-100%)

  • Tank Level Senders:
    All popular American and/or European resisitive type fuel level senders with 0-30, 0-70, 0-90, 10-73, 10-180, 33-240, 40-250 ohm (and their reverse) such as GM, VDO, Teleflex, Faria, Centroid, Aerotech, Stewart-Warner, etc.

    Data Output:
  • NMEA 0183 serial 4800 BAUD ($IIXDR sentence).

  • Built-in 85 dB audible alarm. Independent settable low and high level alarms.

    External Alarm Output:
  • The NMEA 0183 data output terminal may be programmed as an external alarm output

  • 2.5" dia X 4.1" deep (61mm x 104mm)

  • 2-1/8" (55mm) round hole

  • This product was added to our catalog on Tuesday 27 January, 2004.

    Customers who bought this product also purchased...

    Opening Hours

    Mon-Fri: 9:00am-5:30pm
    Sat: 9am-4pm
    Sun: Closed

    We accept credit cards

    mastercard and visa

    All transactions are processed in NZD and other currencies are indicative only
    Copyright © 2019 Discount Marine. Powered by Zen Cart