82 Cable St (Cnr Cable & Tory) Wellington, NZ
Ph: 64-4-385 1490  Fax: 64-4-385 8158
Opening Hours:
Mon to Fri: 8.30am-5.30pm, Sat 9am-4pm
Sun Closed
email us

Rule High-Water bilge alarm


The High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned com part ment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires a visual and audible alarm in each unmanned space on commercial vessels at least 26 feet (7.9m) in length.

All positive, negative and grounding buses installed, fully pre-wired. Panels with meters include toggle switch for mounting up to 3 battery banks.

All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Industry standard height and width
Countersunk mounting holes throughout
Detailed installation instructions and cutout template included
Includes set of 30 common Large Format Panel Labels
Over 500 individual labels available

Description - 13 Position
Meter Type/PN -
Voltage - 12/24V
Amperage - 100A
Width in (mm) - 5.25 (133.35)
Height in (mm) - 11.25 (285.75)
Weight Lb (Kg) - 2.76 (1.25)
Installed 15A Single Pole Circuit Breakers - 10

Add to Cart:

  • Manufactured by: Rule

This product was added to our catalog on Thursday 04 March, 2010.

Copyright © 2019 Discount Marine. Powered by Zen Cart