82 Cable St (Cnr Cable & Tory) Wellington, NZ
Ph: 64-4-385 1490  Fax: 64-4-385 8158
NEW ZEALAND
Opening Hours:
Mon to Fri: 8.30am-5.30pm, Sat 9am-4pm
Sun Closed
email us

Cruzpro F60 Low Cost Fuel Guage

$199.00NZD



The F60 Digital Fuel Gauge provides a digital display for fuel level. Level can be displayed in liters/gallons or percent (0-100%) up to 999 gallon/liters or as a percentage (0-100%) up to 6500 liters/gallons.

The F60 has been pre-programmed to work with all known resistive type level senders with 0-30, 0-70, 0-90, 10-73, 10-180, 33-240, 40-250 ohm (and their revere) outputs made by VDO, Teleflex, Mercury, GM, Stewart-Warner, Centroid, Aero-Tec and others and works with both American and European style senders (senders available seperately).

Low and High Level alarms can be easily set by the user. When activated, the built-in 85 dB alarm will sound and the display will flash.

Five levels of backlighting can be selected and all set-up, calibration constants, alarm values and sender characteristics are saved in a non-volatile memory.

An external alarm output or NMEA 0183 digital serial data output can be programmed.

All constants and sender characteristics are pre-set during manufacture but you may alter these settings to suit your particular needs. Sender selection can be altered over a wide range using the front-panel switches. All information is automatically saved to non-volatile memory.

With a press of the button you can display liquid levels in Gallons or Litres or as a percentage (0-100%).

The F60 draws only 0.017 amps and 5 levels of backlight (including OFF) can be selected from the front panel.

The F60 outputs a regulated 5VDC to the sender so the reading is stable and does not change with raw battery voltage (as standard analog gauges do).

The F60 outputs fuel level on the standard NMEA 0183 serial data line at 4800 BAUD. This ASCII information can be used to log performance, repeat the display information at a remote location (see www.cruzpro.com/rp30.html ) or for use with the CruzPro SEAviz virtual instrumentation software running under Windows on your computer (see www.cruzpro.com/seaviz.html). If NMEA 0183 serial data is not required, then the output terminal can be programmed as an external alarm output pin.


Using the F60 with capacitive senders such as the Centroid 3-wire 10-180 ohm or 33-240 ohm senders. Detailed instructions on setting up the Centroid capacitive senders to work with electronic tank level gauges such as the CruzPro FU30, TL25, TL30 and F30

Specifications

Operating Voltage:
  • 9.5 - 33.0 VDC

    Current Drain:
  • 0.018 amps nominal

    Display:
  • 4 digit LCD, 5 levels of backlighting

    Data:
  • Fuellevel display in Liters or Gallons or as a percentage (0-100%)

    Inputs:
  • Tank Level Senders:
    All popular American and/or European resisitive type fuel level senders with 0-30, 0-70, 0-90, 10-73, 10-180, 33-240, 40-250 ohm (and their reverse) such as GM, VDO, Teleflex, Faria, Centroid, Aerotech, Stewart-Warner, etc.

    Data Output:
  • NMEA 0183 serial 4800 BAUD ($IIXDR sentence).

    Alarms:
  • Built-in 85 dB audible alarm. Independent settable low and high level alarms.

    External Alarm Output:
  • The NMEA 0183 data output terminal may be programmed as an external alarm output

    Size:
  • 2.5" dia X 4.1" deep (61mm x 104mm)

    Mounting:
  • 2-1/8" (55mm) round hole





  • Add to Cart:

    • Shipping Weight: 1lbs
    • 2 Units in Stock
    • Manufactured by: Cruzpro


    This product was added to our catalog on Tuesday 27 January, 2004.

    Customers who bought this product also purchased...


    Copyright © 2017 Discount Marine. Powered by Zen Cart