82 Cable St (Cnr Cable & Tory) Wellington, NZ
Ph: 64-4-385 1490  Fax: 64-4-385 8158
NEW ZEALAND
Opening Hours:
Mon to Fri: 8.30am-5.30pm, Sat 9am-4pm
Sun Closed
email us

Cruzpro D110 1000' DSP Depth Sounder

$499.00NZD

D110 1000' DSP Depth Sounder


CE Certified

Waterproof front case


Specifications
Operating Voltage:
9.50 - 16.00 VDC

Current Drain:
0.035 amps nominal

Display:
Large 4 digit LCD, 5 levels of backlighting with external backlight on/off control

Display Data:
Depth
Shallow Alarm
Deep Alarm
Keel Offset
Feet, Meters, Fathoms

Ranges:
1.2 to 1000+ feet (in tenths below 20.0)
0.4 to 365+ meters (in tenths below 20.0)
0.2 to 167+ fathoms (in tenths below 20.0)

Data Ouput:
NMEA 0183 serial 4800 BAUD, $SDDPT
Programmable as an external alarm output

Alarms:
Built-in 85 dB audible alarm. Settable shallow, deep and anchor drag alarms.

Size:
4.3" x 4.3" (110m x 110mm)

Mounting:
2-1/8" (54mm) round hole

D110
The D110 Digital DSP depth sounder uses Digital Signal Processing (DSP) to reliably display water depth from 1.2 foot (0.4 Metre) to 1000+ feet (365 Metres). Depth can be displayed in feet, meters or fathoms. Variable display damping is provided so the user can optimize response speed against display stability (averaging).
The D110 has programmable shallow, deep and anchor drag alarms built-in and can display the depth in feet, metres or fathoms. A keel offset from -20.0 to +20.0 feet can be entered so the D110 shows the depth below the surface, below the keel or below the transducer. The alarm values and keel offset are automatically converted if the units of measure are changed between feet, meters and fathoms.

The D110 uses Digital Signal Processing (DSP) to enable sensitivity never before found in such a low cost sounder like the D110. The DSP also provides superior high speed rejection of false signals due to transducer slap (buffeting), surface turbulence, thermoclines, double bounce and is almost immune to other depth sounders and fishfinders operating near-by.

Five levels of backlighting can be selected for night-time viewing. The backlights can be turned ON and OFF remotely. All set-up constants are saved in a non-volatile memory.

The D110 outputs depth and keel offset as a standard NMEA $SDDPT sentence on NMEA 0183 serial data line at 4800 BAUD. This ASCII information can be used to log performance, repeat the display information at a remote location (see www.cruzpro.com/rp30.html ) or for use with the CruzPro SEAviz virtual instrumentation software running under Windows on your computer (see www.cruzpro.com/seaviz.html). If NMEA 0183 serial data is not required, then the output terminal can be programmed as an external alarm output pin.

Both through-hull and transom mount transducers are available separately for the D110.




Add to Cart:

  • Shipping Weight: 1lbs
  • 5 Units in Stock
  • Manufactured by: Cruzpro


This product was added to our catalog on Sunday 22 June, 2003.

Copyright © 2017 Discount Marine. Powered by Zen Cart