Add a flat surface to common winch handle receivers, or a RAILBLAZA StarPort™!
Making your barbecue, baitboard, table or work surface StarPort-friendly means you can lock it it in place when in use, and put it away to re-task the
StarPort for a different application.
The StarPort™ Platform also snaps into most sailboat winch handle receivers (optional locking mechanism for sailboat winch applications is supplied)
Adjustable neck ensures you have a flat surface in any orientation.
What You Get:
1 x StarPort Platform (white or black - please choose below)
1 x StarPort™
1 x surface mount adapter ring
1 x weather-tight bung
2 x 12-gauge 32 mm self-tapping screws
2 x (M6 x 32 mm) bolts, washers & nuts
INSTALLATION: StarPort™
The StarPort™ can be mounted on the surface using the surface mount collar supplied or it can be recessed into any horizontal or vertical surface.
Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.
We recommend the use of a silicone-based sealant between the collar and the deck.
SURFACE/RECESS MOUNT
Drill holes using the template supplied.
SURFACE MOUNT: Stack collar, gasket and StarPort™ in place, then fit bolts or screws.
RECESS MOUNT: Fit gasket and StarPort™ in place, then fit bolts or screws.
Tighten nuts or screwheads to a firm tension.
INSTALLATION: StarPort™ Platform
The StarPort™ Platform enables work platforms (baitboards, tables) and barbecues to be installed on any surface. Even a TV could be mounted. With another set of StarPorts™ you could also secure your baitboard in storage, eg. transfer your baitboard from your fishing position to your storage locker.
You can use your StarPort™ Platform as a template to mark your holes on the surface to be mounted. Eight positions are able to be used, however, we recommend using at least four.